This is the little brother of our incredible 85 ft / 26m pole. Removing the bottom two segments of the 85 ft / 26m pole to create a 72 ft / 22m pole reduces height by 13 ft but makes it a lot lighter and easier to install.
Like all our other poles the Spiderbeam® 22m fiberglass pole is carefully designed to maintain low weight and perfect balance. It can still be installed by "walking up" the pole.
The pole starts out very rugged at the bottom (95mm diameter / 2mm wall thickness) and still has 45mm diameter / 1.7mm wall thickness at 13.5m height. The upper sections are slim and light (1mm wall thickness), preventing the pole from becoming top-heavy and keeping it perfectly balanced. A special reinforcing winding technique - several layers of fiberglass are wound in alternating direction (criss/cross winding) - provides greatly increased lateral and linear strength.
The pole comes complete with a set of 12 rubber padded stainless steel clamps and 2 guy rings made from strong belts, for guying the mast the 5th segment and above the 9th segment. The best suitable rope is our 2mm Kevlar rope.
Click here for a .pdf graphic document on guying the poles
Specifications:
- fully extracted length 72 ft (22 m)
- collapsed transport length 6 ft 6 inches (2 m)
- weight 28 lbs (13 kg)
- bottom diameter 3 3/4 inches (95mm)
- top diameter 1/6 inch (4mm)
- wall thickness 1mm-2mm
- number of segments 13
- black fiberglass, UV protected specially reinforced multi layer winding