erc_version4

ERC Version 4 RS232
Add to cart
  • Description
  • More

ERC Version 4 RS232 KIT with components, PC board, cable, complete build and installation instructions, CD with calibration and operation software.

Kit includes all components to build the ERC Version 4 RS232 and to install it inside controller.

  • RS232 cable and 12VDC power cable.
  • Instructions how to build and use ERC Version 4 RS232.
  • Installation guide for more than 90 rotators.
  • Software Service Tool (Windows XP/Vista/7/8/10 32 and 64 bit) for configuration and calibration.
  • Rotor Control Software (Windows XP/Vista/7/8/10 32 and 64 bit).

 

ERC Version 4 RS232 KIT with components, PC board, cable, complete build and installation instructions, CD with calibration and operation software. 

Specifications:

  • PC board size : 3.15 x 2.4 inches (80 x 61 mm)

  • DC supply voltage : 11-15 VDC, max 110mA, protected against wrong polarization

  • Operating temperature : 0 to 70° C

  • Software driven calibration

  • Full support for rotators with overlap up to 180°

  • Extended calibration every 30° to compensate non-linearities of the rotator feedback voltage

  • Security stop, if the rotator does not move

Relay circuits:

  • CW/CCW : each 2xON/OFF (DPDT) max 50VAC/3A or 30VDC/2.5A

  • AUX : 1xON (SPST) max. 250VAC at 3A

Communication port:  Serial

ERC is compatible to a subset of the following protocols:

  • Hygain DCU-1 with extension for position feedback

  • Yaesu GS232A

  • Yaesu GS232B