ERC 8 pin DIN connector with 8 wire cable.
ERC M uses 15 pin connector on the board supplied with ERC M > multi-wire cable > 5, 6, or 8 pin DIN connector depending on rotator when a Rotorcard is not needed.
Use for Yaesu G5400/5500/5600 or Kenpro KR5400/5500/5600 with DIN connector on the rear of the rotator control box for building your own cable. The 15 pin connector for the opposite side is included with the ERC M.
We also have a pre-assembled 8 pin DIN to 15 pin ERC M board cable available at $25.